Brother MFC-J410W User Manual
Page 70
Advertising
Wireless configuration using the Brother installer application
63
4
o
A wireless LAN report will automatically be printed. Choose the status as it is shown for the Connection
on the wireless LAN report.
Click Next. If your status is "Connection:OK", go to step q.
If your status is "Connection:Failed", go to step p.
Note
If you are using WEP and your status is "Connection:OK" but your machine is not found, make sure you
entered the WEP key correctly. The WEP key is case sensitive.
p
Click Finish. Wireless setup failed as it was unable to associate with a wireless network. Check the error
code on the printed wireless LAN report and refer to Troubleshooting in the Quick Setup Guide. Then try
starting from step c-3 again.
Advertising