Before configuring the wireless settings, Configure the wireless settings, Important – Brother MFC-J410W User Manual

Page 55

Advertising
background image

Wireless configuration using the Brother installer application

48

4

Configuration using WPS or AOSS™ from the control panel
menu (Automatic wireless mode)

4

Before configuring the wireless settings

4

IMPORTANT

• If you have previously configured the wireless settings of the machine, you must reset the network LAN

settings before you can configure the wireless settings again.
Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.

Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically.

• If you are using Windows

®

Firewall or a firewall function of anti-spyware or antivirus applications, disable

all personal firewall software (other than Windows

®

Firewall), anti-spyware or antivirus applications for the

duration of the configuration. Once you are sure that you can print, configure the software settings
following the instructions again.

Configure the wireless settings

4

a

(For DCP-J315W, DCP-J515W, MFC-J265W, MFC-J270W, MFC-J410W and MFC-J415W)
Press Menu.
Press a or b to choose Network, press OK.

Press a or b to choose WLAN Enable, press OK.
Press a or b to choose On, press OK.

(For DCP-J715W, MFC-J615W and MFC-J630W)
Press Menu.
Press a or b to choose Network, press OK.

Press a or b to choose Network I/F, press OK.
Press a or b to choose WLAN, press OK.

b

Turn on your computer.
Close any applications running before you start configuration.

Advertising
This manual is related to the following products: