Subnet mask – Brother MFC-J410W User Manual

Page 74

Advertising
background image

Control panel setup

67

5

e

Press a or b to choose IP Address.

Press OK.

f

Enter the IP address.
(For MFC models) Press OK.
(For DCP models) Press a, b, d or c to select

, and press OK.

Note

For DCP models
To enter the number, press a, b, d or c to select a number displayed on the LCD. Then press OK. Repeat
this step until you have entered all the numbers.

g

Press Stop/Exit.

Subnet Mask

5

This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.

a

Press Menu.

b

Press a or b to choose Network.

Press OK.

c

For DCP-J715W, MFC-J615W and MFC-J630W
(For Wired) Press a or b to choose Wired LAN, and press OK.

(For Wireless) Press a or b to choose WLAN, and press OK.

d

Press a or b to choose TCP/IP.

Press OK.

e

Press a or b to choose Subnet Mask.

Press OK.

f

Enter the Subnet Mask address.
(For MFC models) Press OK.
(For DCP models) Press a, b, d or c to select

, and press OK.

Note

For DCP models
To enter the number, press a, b, d or c to select a number displayed on the LCD. Then press OK. Repeat
this step until you have entered all the numbers.

g

Press Stop/Exit.

OK

OK

OK

OK

Advertising
This manual is related to the following products: