Brother MFC-J410W - Manual (Page 84)

Control panel setup
77
5
Restoring the network settings to factory default
5
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Network Reset.
Press OK.
d Press 1 for Reset.
e
Press 1 for Reboot.
Note
For DCP models, press + for Network Reset and then press + for Reboot.
f
The machine will re-start.
(For DCP-J715W, MFC-J615W and MFC-J630W) You can now reconnect the network cable and
configure the network settings to work with your network.