Brother HL-L9200CDWT - Manual (Page 123)

General Information
116
3
Color Correction
3
The output density and print position for each color may vary depending on the machine's environment, such
as temperature and humidity.
Color Calibration
3
Calibration helps you improve the color density.
NOTE
• If you are using the Windows
®
printer driver, the driver will get the calibration data automatically if both
the Use Calibration Data and Get Device Data Automatically check boxes are selected. The default
settings are On. See Color Calibration on page 48.
• If you are using the Macintosh printer driver, you must perform the calibration using the Status Monitor.
Turn on the Status Monitor, and then select Color Calibration from the Control menu. See Status Monitor
on page 82 for how to turn on the Status Monitor.
Calibrate
a Press
b Press Calibration > Calibrate.
c Press Yes to confirm.
d The Touchscreen displays Completed.
e Press .
Reset
Reset the calibration parameters back to those set at the factory.
a Press
b Press Calibration > Reset.
c
Press Yes to confirm.
d
The Touchscreen displays Completed.
e
Press .