Replacing the belt unit, Belt end soon, Replace belt – Brother HL-L9200CDWT User Manual
Page 147: 5replacing the belt unit, Important
Routine Maintenance
140
5
Replacing the belt unit
5
Order No. BU-320CL
A new belt unit can print approximately 50,000 pages (5 pages per job),
or 20,000 pages
(1 page per job)
1
Letter or A4 size single-sided pages.
2
Belt unit life is approximate and may vary by type of use.
Belt End Soon
5
If the Touchscreen displays Belt End Soon, it means the belt unit is near the end of its life. Buy a new belt
unit and have it ready before you get a Replace Belt message. To replace the belt unit, see Replacing the
Replace Belt
5
When the Replace Belt message appears on the Touchscreen, you must replace the belt unit.
After replacement, reset the belt unit by following the instructions included with the new belt unit.
IMPORTANT
• DO NOT touch the surface of the belt unit. If you touch it, it could degrade print quality.
• Damage caused by incorrect handling of the belt unit may void your warranty.
Replacing the belt unit
5
a
Make sure that the machine is turned on.
b
Press the front cover release button and pull open the front cover.