Brother HL-L9200CDWT - Manual (Page 65)

Driver and Software
58
2
Advanced options
2
Access the Advanced options by clicking the Advanced... button on the Layout tab or Paper/Quality tab.
a Choose the Paper Size and Copy Count (1).
 Paper Size
From the drop-down list choose the size of paper you are using.
 Copy Count
The copy selection sets the number of copies that will be printed.
b Set the Image Color Management, Scaling and TrueType Font settings (2).
 Image Color Management
Specify how to print your color graphics:
• If you don’t want to enable Image Color Management, click ICM Disabled.
• If you want the calculations for color matching to be performed on the host computer before it
sends the document to the machine, click ICM Handled by Host System.
• If you want the calculations for color matching to be performed on your machine, click ICM
Handled by Printer using printer calibration.
 Scaling
Specify whether to reduce or enlarge documents, and by what percentage.
 TrueType Font
Specify the TrueType font options. Click Substitute with Device Font (the default) to use equivalent
printer fonts for printing documents that contain TrueType fonts. This will permit faster printing;
however, you might lose special characters not supported by the printer font. Click Download as
Softfont to download TrueType fonts for printing instead of using printer fonts.
1
2