Brother HL-L9200CDWT - Manual (Page 177)

Routine Maintenance
170
5
Replacing periodic maintenance parts
5
The periodic maintenance parts must be replaced regularly to maintain print quality. The parts listed below
must be replaced after printing approximately 50,000 pages
1 for PF Kit MP and 100,000 pages 1 for PF Kit
1, PF Kit 2, Fuser and Laser.
Please contact Brother Customer Service or a Brother Authorized Service Center when the following
messages appear on the Touchscreen:
1 Letter or A4 size single-sided pages.
2 Life of part is approximate and may vary by type of use.
3 If the optional lower tray is installed on HL-L9200CDW.
Touchscreen message Description
Replace Fuser
2 Replace the fuser unit.
Replace Laser
2 Replace the laser unit.
Replace PF Kit 1
2 Replace the paper feeding kit for the paper tray.
Replace PF Kit 2
2 3 Replace the paper feeding kit for the lower tray (option).
Replace PF Kit MP
2 Replace the paper feeding kit for the multi-purpose tray.