Brother HL-L9200CDWT - Manual (Page 30)

Printing Methods
23
1
Manual 2-sided printing
1
The BR-Script printer driver for Windows ® does not support manual 2-sided printing.
If you are using the Macintosh Printer Driver, see Manual 2–sided Printing on page 75.
Manual 2-sided printing using the Windows ® printer driver
1
a Change the printer driver settings for your operating system (for details, see Chapter 2: Driver and
Software).
Choose the option you want from each of the following drop-down lists (for more information on
acceptable paper sizes and types, see Paper type and size on page 2.):
 Paper Size
You can use all the paper sizes specified for the tray you are using.
 Media Type
You can use all the media types that are specified for the tray you are using, except envelopes and
labels, which have only one print side.
 Paper Source
Tray1
MP Tray
Tray2 (if available)
 2-sided / Booklet
2-sided (Manual)
 2-sided Type in 2-sided Settings
There are four options for each orientation (see 2-sided / Booklet on page 38).
 Binding Offset in 2-sided Settings
Specify the offset for binding (see 2-sided / Booklet on page 38).
For other settings, see Chapter 2: Driver and Software.
b
Send the print job to the machine. The machine will print all the even-numbered pages on one side of
the paper first. Then, the Windows ® driver instructs you (with a pop-up message) to reinsert the paper
to print the odd-numbered pages.
NOTE
Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or thick paper is not
recommended.