Brother MFC-9420CN - Manual (Page 138)

Network Scanning (For Mac OS ® X 10.2.4 or greater)
10 - 2
10
Registering your Macintosh ® with the machine
To use the “Scan To” button on the machine you must register your Macintosh ® with the machine.
1
From Library, select Printers, Brother, Utilities and DeviceSelector, and then doubleclick
DeviceSelector.
The DeviceSelector window appears. This window can also be opened from the ControlCenter2.
2
Turn on Register your computer with the “Scan To” functions at the machine and enter the name
you want displayed on the machine for your Macintosh
® (Max. 15 characters).
3
Click the OK button.
Note
You can avoid receiving unwanted documents by setting a 4-digit Pin number. Turn on “Scan To” button
PIN number for this computer. Enter your Pin number in the Pin number and Retype Pin number field.
To send data to a computer protected by a Pin number, the Display prompts to enter the Pin number before
the document can be scanned and sent to the machine. (See Using the Scan Key on page 10-3 to 10-6.)