Brother MFC-9420CN - Manual (Page 67)

4
4
4 - 1
To use the machine as a Network Scanner, the machine must be configured with a TCP/IP address that
matches your network. You can set or change the settings from the control panel. (Please see the Network
User's Guide on the CD-ROM.)
Before using Network Scanning
Network License
MFC-9420CN includes the PC license for up to 5 Users.
This license supports the installation of the MFL-Pro Software Suite including ScanSoft ® PaperPort ® 9.0SE
on up to 5 PC’s for use on a network.
If you want to use more than 5 PCs with ScanSoft ® PaperPort ® 9.0SE installed, please purchase NL-5 which
is a multiple PC license agreement pack for up to an additional 5 Users. To purchase NL-5, please contact
your Brother Sales Office.
Note
■
Max. 25 clients can be connected to one machine on a Network. For example, if 30 clients try to connect
at a time, 5 clients will not be shown on the LCD.
■ To use Network Scanning with Windows ® XP that is protected by the firewall, Network Scanning program
must be excluded from the firewall setting. Visit the Solution Center (http://solutions.brother.com) for more
information.
■
Network Scanning is not supported in Windows NT ® .
Network Scanning