Brother MFC-9420CN - Manual (Page 42)

Scanning
2 - 9
2
Scanning a document into the PC
There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the Flatbed scanner glass.
If you would like to scan and then crop a portion of the page after pre-scanning the document, you will need
to use the scanner glass (Flatbed). (See Pre-Scanning to crop a portion you want to scan using the scanner
glass on page 2-10.)
Scanning a document using the ADF
1
Place the document face up in the ADF.
2
Select the Document Feeder from the Paper source
drop-down list box (A).
3
Select the picture type (B).
4
Select the Page size from the drop-down list box (D).
5
If you require advanced settings, click on the tab Adjust
the quality of the scanned picture (C). You can select
Brightness, Contrast, Resolution and Picture Type
from the Advanced Properties. Click the OK button
after you choose your settings.
Note
■ You can select a resolution of up to 1200 dpi.
■
For resolutions greater than 1200 dpi, use the Brother Scanner Utility. (See Brother Scanner Utility on
page 2-11.)
6
To start scanning your document, click the Scan button in the Scan dialog box.
A
B
C
D