Brother MFC-9420CN - Manual (Page 35)

Scanning
2 - 2
2
Access the Scanner
1
Open the software application (ScanSoft ® PaperPort ® 9.0SE) to scan a document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft ® PaperPort ® 9.0SE. If you are
scanning into another software application, the steps may vary.
2
Click File, then Scan. Or select the Scan button.The Scan panel appears in the left side of the screen.
3
Choose the scanner you are using from the Scanner drop-down list box.
Note
If the machine is connected via:
Parallel cable use Brother MFC-9420CN
USB cable use Brother MFC-9420CN USB
LAN cable use Brother MFC-9420CN LAN
If you are using Windows ® XP, select TW-Brother MFC-9420CN, not WIA-Brother MFC-9420CN.
4
Click Scan.
The Scanner Setup dialog box will appear: