Brother MFC-3200C - Manual (Page 153)

U S I N G T H E W I N D O W S ® - B A S E D B R O T H E R S M A R T U I C O N T R O L C E N T E R ( F O R W I N D O W S ® X P ) 16 - 6
MFC3200C-US-FM6.0
To change the default setting of the scan, click on the Scan Settings tab.
You can set the Color Mode to Black & White, 8-bit Gray or 24-bit Color.
The resolution can be changed from 100 to 600 dpi. You can define the size of
the paper you’re using, and you can adjust the brightness and contrast of the
image before scanning.
Scan To OCR
To configure the Scan to OCR feature left click on the Scan to OCR button and
the following screen will appear. You have the ability to change the
configuration, which includes the destination applicatione.
Color Scanning may not be supported by your specific model MFC. Please
check the specifications for your particular model MFC.