Choosing the handset volume (for volume amplify), Setting volume amplify – Brother MFC-3200C User Manual
Page 65
I N I T I A L S E T U P
5 - 6
MFC3200C-US-FM6.0
Choosing the Handset Volume (For Volume Amplify)
Before you begin to use the machine, you must decide if you need to set the
handset volume to
VOL AMPLIFY: ON
for a user who is hearing-impaired.
The AMPLIFY volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if
none
of the users are hearing-impaired.
During a conversation, users can press Volume
on the control panel to
adjust the volume to
LOW
or
HIGH
. When the handset is replaced, the handset
volume will remain until you change it again.
VOLUME AMPLIFY: ON—TEMPORARY
This setting is appropriate if
some
of the users are hearing-impaired. During a
conversation, users can press Volume
on the control panel to adjust the
volume to
LOW
,
HIGH
or
AMPLIFY
. When the handset is replaced, the
handset volume returns to the default setting of
LOW
.
VOLUME AMPLIFY:ON
—
PERMANENT
Choose
VOL AMPLIFY:ON
—
PERMANENT
if
all
of the users are
hearing-impaired. During a conversation, users can press Volume
on the
control panel to adjust the volume to
LOW
,
HIGH
or
AMPLIFY
. When the
handset is replaced, the handset volume returns to the default setting of
AMPLIFY
.
WARNING
It is important that you do NOT choose
PERMANENT
unless ALL the
users are hearing-impaired.
Otherwise, the default setting of
AMPLIFY
may
damage the hearing of some users.
Setting Volume Amplify
Please carefully read
Choosing the Handset Volume
the following steps:
1
Press
Menu/Set
,
1
,
5
,
5
.
When you press Volume
on the control panel to adjust the volume, the
LCD shows the setting you are choosing. Each key press changes the volume
to the next setting.
or
or
or
or
5 . V O L U M E A M P L I F Y