Brother MFC-3200C - Manual (Page 76)

7 - 3 S E T U P S E N D
MFC3200C-US-FM6.0
Fax Resolution
When you have a document in the ADF, you can use the FAX Resolution key
to temporarily change the setting. Press FAX Resolution repeatedly until the
LCD shows the setting you want.
— OR —
You can change the default setting.
1
Press Menu/Set , 2 , 2 , 2 .
2
Press to select the resolution you
want, and then press Menu/Set .
3 Press Stop/Exit .
STANDARD —Suitable for most typed documents.
FINE —Good for small print; transmits a little slower than Standard resolution.
S. FINE —Good for small print or artwork; transmits slower than Fine
resolution (black and white only).
PHOTO —Use when original has varying shades of gray; this is the slowest
transmission time (black and white only).
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones
while sending a fax.
1
Place the original face down in the ADF.
2
Pick up the handset and listen for a dial tone— OR —press Hook/Hold and
listen for a dial tone.
3 Enter the fax number you want to call. You can enter the digits using the dial pad,
or you can enter a One Touch or Speed Dial number or you can call using Search.
(See
One Touch Dialing , page 8-5.)
4 When you hear the fax tone, press Black Fax Start .
5
Replace the handset.
Automatic Transmission
This is the easiest way to send a fax. IMPORTANT : Do not pick up the
handset, or press Hook/Hold to listen for a dial tone.
1 Place the original face down in the ADF.
2 Enter the fax number using the dial pad, One Touch, Speed Dial or Search.
(See
Speed Dialing , page 8-5.)
3
Press Black Fax Start.
2 . F A X R E S O L U T I O N
or