Brother MFC-3200C - Manual (Page 86)

8 - 2 A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
MFC3200C-US-FM6.0
Storing Speed Dial Numbers
You can store Speed Dial numbers, so when you dial you will have to press only
five keys (Search/Speed Dial, #, the two-digit location, and Black Fax Start).
The MFC has 100 Speed Dial locations.
1 Press Menu/Set , 2 , 3 , 2 .
2
Use the dial pad to enter a two-digit
location (00-99), and then press
Menu/Set .
3
Enter the number (up to 20 digits),
and then press
Menu/Set .
4 Use the dial pad to enter the name (up to
15 characters), and then press
Menu/Set . You can use the chart on
page 5-3 to help you enter letters— OR —
Press Menu/Set, and then go to Step 5 to store the number without a name.
5 Return to Step 2 to store another Speed Dial number— OR —Press Stop/Exit .
Changing One Touch and Speed Dial Numbers
If you try to store a One Touch
or Speed Dial number in a location where a
number is already stored, the LCD shows
the current name stored there, and then prompts you to either:
1
Press 1 to change the stored number— OR — Press 2 to exit without making a
change.
2 Enter a new number, and then press Menu/Set .
■ If you want to erase the whole number, press Stop/Exit when the cursor is
to the left of the digits. The letters above and to the right of the cursor will be
deleted.
■ If you want to change a digit, use or to position the cursor under the
digit you want to change, and then type over it.
3 Follow the directions beginning at Step 4 in Storing One Touch Numbers and
Storing Speed Dial Numbers .
Note
If you need to store a pause longer than 3.5 seconds, press Redial/Pause two
or more times.
Note
You can store Groups (for Broadcasting) on the One Touch keys.
2 . S P E E D - D I A L
S P E E D - D I A L ? #
# 0 5 :
N A M E :
1 . C H A N G E 2 . E X I T