7 setup send, Before you begin, Using the adf (automatic document feeder) – Brother MFC-3200C User Manual

Page 74: Setup send -1, Before you begin -1, Using the adf (automatic document feeder) -1, Setup send

Advertising
background image

7 - 1

S E T U P S E N D

7

MFC3200C-US-FM6.0

7

Setup Send

Before You Begin

Before you begin sending faxes, please be sure to read all the instructions and
cautions listed below for placing originals in the automatic document feeder.

Using the ADF (Automatic Document Feeder)

Documents must be between 3.5 and 8.5 inches wide and 5 and 14 inches long.

Make sure you place originals

face down

,

top edge first

.

Adjust the paper guides to fit the width of your document.

The automatic document feeder (ADF) can hold up to 20 pages, feeding each
one individually through the MFC. Use standard (20 lb./75g/m

2

) paper when

using the ADF.

Fan the paper, and then stagger the pages in the ADF as shown:

DO NOT

use curled, wrinkled, folded, or ripped paper, or paper with staples,

paper clips, paste or tape attached.

DO NOT

use cardboard, newspaper or

fabric.
Make sure documents written with ink are completely dry.

Originals are Face
Down in the ADF

Paper Guides

Approx. 1/2 inch

Advertising