Using the focal length guide 109, Cop y – Canon XF305 User Manual

Page 109

Advertising
background image

109

Recording

3

Using the Focal Length Guide

Using the Focal Length Guide

The focal length guide aids you when using two camcorders for 3D
recording. The guide appears as a numerical value and has a range of
195 steps. You can set the guide to 0 at any point in the zoom range to
help precisely calibrate both camcorders.

1 Set up two camcorders and align their picture angle at full

telephoto.

2 Open the [Focal Length Guide] submenu.

[l Camera Setup]

[Zoom]

[Focal Length Guide]

3 Select [Set To 0] and then press SET.

• The focal length guide appears on the left side of the screen as

[z ±0]. To turn off the indicator, select [Off] instead.

4 Press MENU.

5 Operate the zoom.

• If both camcorders are set so that the same value is displayed during

zoom, the focal length for both camcorders will remain almost the
same.

NOTES

• Although the focal length guide is an aid for 3D recording, make sure to

check the picture angle visually while recording.

• You can obtain more accurate results when you perform this procedure

at full telephoto.

• The same picture angle for both camcorders cannot be guaranteed.

Operating modes:

[l Camera Setup]

[

Zoom

]

[Focal Length Guide]

[Off]

COP

Y

Advertising
This manual is related to the following products: