Colors bars/audio reference signal 96, Cop y, Colors bars/audio reference signal – Canon XF305 User Manual

Page 96

Advertising
background image

Recording

96

3

Colors Bars/Audio Reference Signal

Colors Bars/Audio Reference Signal

You can have the camcorder generate and record color bars and a 1 kHz
audio reference signal and output them from the HD/SD SDI terminal
(b only), HDMI OUT terminal, HD/SD COMPONENT OUT
terminal

1

, AV terminal, VIDEO 2 terminal

1

and W (headphone) terminal

2

.

1

Outputs color bars only.

2

Outputs audio reference signal only.

Recording Color Bars

You can choose between EBU ([Type 1]) and SMPTE color bars ([Type 2]).

1 Open the color bars [Type] submenu.

[l Camera Setup]

[Color Bars]

[Type]

2 Select [Type 1] (EBU) or [Type 2] (SMPTE) and then press SET.

3 Open the [Enable] submenu to activate the color bars.

[l Camera Setup]

[Color Bars]

[Enable]

4 Select [On] and then press SET.

• The selected color bars appear on the screen and will be recorded

when you press the START/STOP button.

• Turning the camcorder off or changing the operating mode to

mode will deactivate the color bars.

• Alternatively, you can set an assignable button to [Color Bars]

(0 111) to activate the color bars.

Recording an Audio Reference Signal

The camcorder can output a 1 kHz audio reference signal with the color
bars.

1 Open the [1 kHz Tone] submenu.

[m Audio Setup]

[Audio Input]

[1 kHz Tone]

2 Select the desired level and then press SET.

• Available levels are -12 dB, -18 dB and -20 dB.

• Select [Off] to turn off the signal.

• The signal is output at the selected level and will be recorded when

you press the START/STOP button.

Operating modes:

[l Camera Setup]

[

Color Bars]

[Type]

[Type 1]

[l Camera Setup]

[

Color Bars]

[Enable]

[Off]

[m Audio Setup]

[

Audio Input]

[1 kHz Tone]

[Off]

COP

Y

Advertising
This manual is related to the following products: