Canon XF305 - Manual (Page 160)

Photos
160
7
Taking Photos
Capturing Photos in MEDIA Mode
You can capture a photo from a clip during playback pause. To capture a
photo, set an assignable button to [Photo] first or use the wireless
controller.
1 Set an assignable button to [Photo] (0 111).
• This step is not necessary if you are using the wireless controller.
2 Select the desired clip and press the D button to start
playback.
3 Pause the playback at the point you want to capture.
4 Press the assignable button to capture a photo.
• Alternatively, press the PHOTO button on the wireless controller.
• The screen will momentarily turn black as if a camera shutter had
released.
• The b icon and the number of available photos appear on the
upper right portion of the screen.
• The SD card access indicator will flash as the photo is being
recorded.
5 Press the B button to stop playback.
IMPORTANT
• Observe the following precautions while the SD card access indicator is
flashing. Failure to do so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not remove the SD card.
NOTES
• If the LOCK switch on the SD card is set to prevent writing, you will not
be able to record a photo. Change the position of the LOCK switch in
advance.
• Even if the [Other Functions] [Custom Function] [Scan Reverse
Rec] setting is set to [Both], [Vertical] or [Horizontal], photos will not be
inverted.
Operating modes:
COP
Y