Canon EOS C300 PL - Manual (Page 114)

Custom Picture Settings
114
Custom Picture Settings
You can preset a number of picture-related settings (A 117). After changing individual settings to your
preference, you can save the whole set in the camcorder or SD card as a custom picture file. You can then load
the file at a later date to change the current settings to the preset levels you selected. You can even add custom
picture settings to clips recorded on a CF card or photos recorded on an SD card.
You can save up to 9 different custom picture files on the camcorder and up to 20 custom picture files on an SD
card. Custom picture files can be copied between the camcorder and recording media.
Custom picture files created with this camcorder are compatible only with other C300 and C300 PL camcorders.
Selecting Custom Picture Files
Select a custom picture file to apply its settings to your recordings or to
edit, rename, protect, or transfer it. When [~ Camera Setup] >
[/ CINEMA Locked] is set to [On], the custom picture menu cannot be
accessed and custom picture files cannot be used.
1 Press the CUSTOM PICTURE button.
• The custom picture menu appears. The currently selected file
appears next to the - icon or [Off] if no file is selected.
• When an optional RC-V100 Remote Controller is connected to the
camcorder, you can display the custom picture menu with the
CUSTOM PICT. button.
2 Select [ - / Select File] and then press SET.
• You can select from a list of custom picture files in the camcorder and SD card. Files in the camcorder begin
with [C1] to [C9]; those on the SD card begin with [SD1] to [SD20].
3 Select the desired file and then press SET.
• Select [Off] to record without applying any custom picture settings.
• To apply the custom picture settings of the selected file, continue to step 4. To perform other operations on
the selected file (edit settings, copy, protect, etc.), continue instead with the one of the procedures in the
following pages.
4 Press the CUSTOM PICTURE button to exit the custom picture menu.
• The selected custom picture file’s settings will be applied. / (camcorder) or . (SD card) and the custom
picture file’s number will appear on the left of the screen.
NOTES
• About changing custom picture related settings using the optional RC-V100 Remote Controller
- If a protected custom picture file or no custom picture file is selected on the camcorder ([- / Select File]
is set to [Off]) custom picture related settings cannot be changed using the remote controller.
- While the remote controller is connected to the camcorder, custom picture files on the SD card ([SD1] to
[SD20]) cannot be used. If you connect the remote controller while a custom picture file on the SD card was
selected, the custom picture file will change automatically to [Off] (recording without custom picture
settings). To use the settings of a custom picture file saved on the SD card, copy the file in advance from the
SD card to an open file slot in the camcorder (A 116).
- Adjusting custom picture related settings using the remote controller will change the settings registered
under the currently selected custom picture file. If you want to keep an important custom picture file, copy it
in advance to the SD card or select in advance a custom picture file you do not mind changing.
Operating modes:
COP
Y