Setting a user memo using wi-fi remote, Setting a user memo using wi-fi remote 97, Cop y – Canon EOS C300 PL User Manual

Page 97

Advertising
background image

97

Using Metadata

Setting a User Memo Using Wi-Fi Remote

After completing the necessary preparations (A 49), you can create a user memo profile and transfer it to the
camcorder from a Wi-Fi-enabled device using the Wi-Fi Remote application. Using the Wi-Fi Remote application
you have two additional advantages over user memos created with Canon XF Utility: you can change the user
memo of the last clip recorded, even if you did not specify a user memo in advance; and you can enter manually
the GPS information of your shooting location.

1 Press the [Metadata Input] tab on the Wi-Fi Remote screen.

2 Press [

Activate].

• Alternatively, on the camcorder, you can set [w Other Functions] > [Set Metadata] > [Setting] to [Remote].

3 Fill the necessary user memo and GPS information fields.

• You can press [Clear] to clear the information entered into each field.

4 Press one of the transfer options to transfer the metadata to the camcorder.

• [Metadata correctly transferred] will be displayed on the Wi-Fi Remote screen and the metadata will be

transferred and applied to the clips on the camcorder.

5 Press

to close the message.

Options

NOTES

• The metadata sent to the camcorder from Wi-Fi Remote will be lost in the following cases.

- If the camcorder was turned off.
- If the [w Other Functions] > [Set Metadata] > [Setting] setting was changed.

• Metadata sent to the camcorder from Wi-Fi Remote will not be added to relay clips recorded before the switch

to the current CF card.

[Apply from Next]:

Adds the metadata you set in Wi-Fi Remote to all clips recorded after the transfer.

[Overwrite Prev.]:

Only available after recording a clip. Adds the metadata you set in Wi-Fi Remote to all clips recorded
after the transfer and also to the last clip recorded (overwriting any user memo that may have been
recorded previously with the clip).

[Overwrite]:

Only available while recording a clip. Adds the metadata you set in Wi-Fi Remote to the clip that is
being recorded (overwriting any previous user memo). It will also add this metadata to all clips
recorded after the transfer.

COP

Y

Advertising
This manual is related to the following products: