Canon EOS C300 PL - Manual (Page 127)

127
Playback
Playing Back Clips
You can play back clips from the clip index screen, [$ Mark] index screen
and [% Mark] index screen. Use the playback control buttons on the
monitor unit. When the monitor unit is not attached, you have limited
playback control options (play/pause/stop only) with the buttons on the
camcorder and full playback control options using the joystick and
joystick guide.
1 Move the orange selection frame to the clip you want to play
back.
2 Press the Ò button to start playback.
• Playback will start from the clip selected and continue until the end of
the last clip in the index screen. When the last frame of the last clip is reached, playback will be paused.
• Press the Ò button again or press SET to pause/resume the playback.
• Press the Ñ button to stop the playback and return to the index screen.
IMPORTANT
• Observe the following precautions while the CF2 or CF3 access indicator is illuminated in red. Failure to do
so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the cover of the CF card slot being accessed.
NOTES
• You may notice brief stops in video or audio playback between clips.
COP
Y