Canon LV-7292S - Manual (Page 12)

12
Part Names and Functions
Top Control
⑦ LAMP REPLACE indicator
Lights yellow when the projection lamp
reaches its end of life (pp.63, 70).
⑧ WARNING indicator
– Lights red when the projector detects an
abnormal condition.
– Blinks red when the internal temperature of
the projector exceeds the operating range
(pp.60, 70).
④ POWER button
Turn the projector on or off (pp.21-23).
⑤ POWER indicator
– Lights red when the projector is in stand-by
mode.
– Lights green during operations.
– Blinks green in the Power management
mode (p.51).
⑥ MENU button
Open or close the On-Screen Menu (p.24).
② POINT ▲▼◄► buttons
– Select an item or adjust the value in the On-
Screen Menu (p.24).
– Pan the image in the Digital zoom +/- mode
(p.37).
③ AUTO SET button
Execute the setting of Auto setup (includes
Auto input and Auto PC functions) in the
setting menu (pp.26, 47).
① OK button
– Execute the selected item (p.24).
–Zoom in or out the image in the Digital zoom
mode (p.37).
2.
32:(5
$ 8 726 (7
0(18
/$035(3/$&(
:$51,1*
92/ 92/
OK
POWER
AUTO SET
MENU
LAMP REPLACE
WARNING
①
②
③
④
⑤
⑧
⑥
⑦