Canon LV-7292S - Manual (Page 29)

Basic Operation
29
LV-RC07
Choose COMPUTER (ANALOG PC) by pressing the COMPUTER button on the remote control unit.
1
Input Menu
2
3
 Note:
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will
be searched automatically (p.47).
COMPUTER
Remote control unit
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Input and then press the
Point ► or the OK button.
When COMPUTER is selected, press the
Point ► button to access the submenu
items. Use the Point ▲▼ buttons to select
the ANALOG PC input source and then
press the OK button.
COMPUTER (SCART)
Input Source Selection (ANALOG PC: COMPUTER)
Direct Operation
Menu Operation
Computer Input
Use the Point ▲▼ buttons to select
COMPUTER and then press the OK button.
COMPUTER button
COMPUTER (ANALOG PC)