Maintenance and cleaning, Warning indicator – Canon LV-7292S User Manual

Page 60

Advertising
background image

60

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

The WARNING indicator shows the state of the function which protects the projector. Check the

state of the WARNING indicator and the POWER indicator to take proper maintenance.

WARNING indicator

The projector is shut down and the

WARNING indicator is blinking red.

When the temperature inside the projector

reaches a certain level, the projector will be

automatically shut down to protect the inside of

the projector. The POWER indicator is blinking

while the projector is being cooled down. When

the projector has cooled down enough (to its

normal operating temperature), it can be turned

on again by pressing the POWER button.

The projector is shut down and the

WARNING indicator lights red.
When the projector detects an abnormal

condition, it is automatically shut down to

protect the inside of the projector and the

WARNING indicator lights red. In this case,

unplug the AC power cord and reconnect it, and

then turn the projector on once again to verify

operation. If the projector cannot be turned

on and the WARNING indicator still lights red,

unplug the AC power cord and contact the

service center.

WARNING

DO NOT LEAVE THE PROjECTOR WITH

THE AC POWER CORD CONNECTED

UNDER AN AbNORMAL CONDITION .

IT MAY RESULT IN FIRE OR ELECTRIC

SHOCK.

Top Control

Top Control

Note:

The WARNING indicator continues to blink even

after the temperature inside the projector returns

to normal. When the projector is turned on again,

the WARNING indicator stops blinking.

Then check the matters below:
– Did you provide appropriate space for

the projector to be ventilated? Check the

installing condition to see if the air vents of

the projector are not blocked.

– Has the projector been installed near an Air-

Conditioning/ Heating Duct or Vent? Move the

installation of the projector away from the duct

or vent.

– Is the filter clean? Clean the filter periodically.

WARNING

blinking red

Maintenance and Cleaning

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

WARNING

lights red

Advertising