Canon LV-7292S - Manual (Page 74)

74
Appendix
Attaching the Filter Cover to the Projector
The supplied filter cover is designed for
preventing dust accumulation on the filter
when mounting the projector on the ceiling.
Place the filter cover on the filter as the
picture shown below.
Turn over the projector. 1
2
Attach the projector to the ceiling mount
in accordance with the instruction manuals
which come with the ceiling mount.
3
 Note:
• To keep the filter cover in position, be sure to
attach the drop-prevention wire by threading it
through the hole of the filter cover.
• If the LV-CL17 Projector Attachment is applied,
the supplied filter cover is unnecessary.
Front feet
Projector
Caps
Filter Cover
(supplied)
Hole
Drop-prevention Wire
(not supplied)
To Ceiling Mount
COMPUTER IN / S-VIDEO IN/ COMPONENT IN
Terminal: Analog RGB (Mini D-sub 15 pin)
5 1 2 3 4
10 9 6 7 8
15 14 13 11 12
Configurations of Terminals
Red/Cr/S-C Input
Ground (Horiz.sync.)
Green/Y/S-Y Input
-----
Blue/Cb/--- Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data
Ground
Vert. sync.
DDC Clock
9
13
10
12
11
14
15
CONTROL CONNECTOR (D-sub 9 pin)
-----
R X D
T X D
-----
SG
-----
-----
-----
Serial
1
2
3
4
5
6
7
8
----- 9