Canon LV-7292S - Manual (Page 59)

Setting
59
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the
operation of the projector.
H-sync freq.
V-sync freq.
Lamp counter
Information Menu
The horizontal frequency of the input signal is
displayed in KHz, or - - - - KHz when no signal.
The vertical frequency of the input signal is
displayed in Hz, or - - - - Hz when no signal.
Numbers of Hz doubles when during Interlace.
The cumulative lamp operating time is displayed.
Press the INFO. button on the remote control
unit to display the Information Menu.
LV-RC07
INFO. button
Remote control unit
Press the Point ▲▼ buttons to select the
Information. The Information Menu is displayed.
See below for displayed information.
Power management mode
Aspect
Off, Standby or Exit, and Timer are displayed.
The selected Screen size is displayed.
Input
Lamp status
The selected input source is displayed.
The selected lamp mode is
displayed.
Language
The selected language is
displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off or On 1 or On 2 is displayed.
Remote control
The selected remote code is displayed.
Direct Operation
Menu Operation
SERIAL NO.
The serial number of the projector is displayed.
The serial number is used to service the
projector.
Information