Canon imagePROGRAF iPF9400S - Manual (Page 30)

5
Make sure the Ink Lamp is lit in red.
Note
• If the Ink Lamp is not lit in red, reload the tank.
6
Close the Ink Tank Cover.
Important
• After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close, some Ink
Tank Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed.
Load the Ink Tank (700 ml)
1
Before opening the pouch, hold the new Ink Tank
with both hands and tilt it to the left and right as
shown, shaking gently it seven or eight times.
Caution
• 700 ml ink tanks are heavy, so use your whole arm to agitate it instead of just your wrist. If you agitate it using
just your wrist, you may injure your wrist.
Replacing Ink Tanks iPF9400S
Basic Guide
Consumables and Maintenance
Ink Tanks
30