Canon imagePROGRAF iPF9400S - Manual (Page 78)

7
When the process is finished, "Preparations for moving the printer finished. Turn the power off" is dis-
played.
When this happens, replace the Maintenance Cartridge currently being used with a new Maintenance Car-
tridge.
8
Press the Power button and turn off the printer.
Pack the printer
1
Disconnect the printer power cord and interface cable, as well as the Media Take-up Unit Power Inlet.
Important
• Turn the power off and then disconnect the power cord. It may damage the printer if you unplug it before it is
off and transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks,
and follow this procedure again.
2
Open the Top Cover and lift the Ejection Guide.
3
Remove the six Ejection Supports and lower the
Ejection Guide.
Preparing to Transfer the Printer iPF9400S
Basic Guide
Printer Relocation
Preparing to Transfer the Printer
78