Printer relocation, Preparing to transfer the printer – Canon imagePROGRAF iPF9400S User Manual
Page 74
Printer Relocation
Printer Relocation
Preparing to Transfer the Printer
Preparing to Transfer the Printer
Preparing to Transfer the Printer
Preparing to Transfer the Printer
To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
Important
•
Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and damage the
printer if you do not prepare the printer correctly and it is tipped or stood on end in transit.
Note
•
Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that is,
when you execute the printer menu item to prepare for transfer).
•
Ink must be drawn into the Maintenance Cartridge before Level 2 or Level 3 printer transfer, as described in the following
table. Prepare the Maintenance Cartridge in advance.
•
Always follow the instructions of the service representative when transferring the printer under Level 3 conditions.
Level
Shipping Method (Ex-
ample)
Permitted Angle of Inclination
Amount of Ink to
Dispose of
Required
Maintenance
1
By truck
Lengthwise: 0–30º
Rotation: 0–10º
0
0(*2)
2
By plane
All directions: 0–30º
Approx. 1,900 ml
(64.3 fl oz)
2 or 3
3
Tipping the printer
or holding it upright
for elevators or
stairs
Lengthwise: 0–90º
Rotation: 0–30º
Approx. 1,900 ml
(64.3 fl oz)
2 or 3
*1: This is the number of new Maintenance Cartridge s required when you execute the Prep.MovePrinter menu.
The number varies depending on the amount remaining in the Maintenance Cartridge being used.
*2: If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, the Main-
tenance Cartridge needs to be replaced.
Preparing to Transfer the Printer
iPF9400S
Printer Relocation
Preparing to Transfer the Printer
74