Canon imagePROGRAF iPF9400S - Manual (Page 64)

*1: If a pending job is selected, Print Anyway is displayed.
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
First Level Second Level Third Level Fourth Level Fifth Level Sixth Level Seventh Level
Test Print Nozzle Check ┋ Status Print ┋ Interface Print ┋ Paper Details ┋ Print Job Log ┋ Menu Map
Adjust Printer Head Posi.
Adj. Standard
Simple
Other Initial adjustmt ┋ Manual (*1)
Feed Priority Adj. Priority Automatic * ┋ Print Quality ┋ Print Length
Adj. Quality
(*2) Auto(GenuinePpr) ┋ Auto(OtherPaper) ┋ Manual
Adjust Length
(*3) Adjustment-
Print A:High ┋ B:Standard/Draft
Change Set-
tings A:High ┋ B:Standard/Draft
Calibration Auto Adjust
Calibration
Log Date ┋ Paper Type ┋ Adjustment Type
Use Adj. Val-
ue Disabled ┋ Enabled *
Set Exec.
Guide Off * ┋ On
Return Defaults
Maintenance Head Clean-
ing Head Cleaning A ┋ Head Cleaning B
Nozzle Check
Replace
P.head Printhead L ┋ Printhead R ┋ L & R Printheads
Repl. maint cart
Head Info Printhead L ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Printhead R ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Repl. S. Cleaner
Change Cutter
Interface Set-
up (*8) EOP Timer
(*8) 10 sec. ┋ 30 sec. ┋ 1 min. ┋ 2 min. ┋ 5 min. ┋ 10 min. *┋ 30 min. ┋ 60
min.
TCP/IP (*8) IPv4 (*8) IPv4 Mode
(*8) Automatic ┋ Manual *
Protocol (*4)
(*8) DHCP (*8) On ┋ Off *
BOOTP (*8) On ┋ Off *
RARP (*8) On ┋ Off *
IPv4 Settings IP Address (*9) xxx.xxx.xxx.xxx
Subnet Mask
(*9) xxx.xxx.xxx.xxx
Default G/W
(*9) xxx.xxx.xxx.xxx
DNS Settings
(*9) DNS Dync up-
date (*9) On ┋ Off *
Pri. DNS SrvAddr (*9)
Sec. DNS SrvAddr (*9)
DNS Host Name (*9)
Menu Structure iPF9400S
Basic Guide
Printer Parts
Operations and Display Screen
64