Canon imagePROGRAF iPF9400S - Manual (Page 80)

8
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
9
Disassemble and repackage the Stand by following the installation procedure (with six people lifting the
printer) in reverse.
Important
• Do not use the procedure for rotated installation (installing by rotating the printer). This may damage the print-
er. For details, see Setup Guide.
10
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.
Reinstalling the Printer Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Assemble the stand
1
Referring to the Printer Stand Setup Guide, assem-
ble the Stand.
Caution
• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself poses
a risk of injury or bending the Stand.
• When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the as-
sembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or damage to
the location site.
Install the printer
1
Mount the printer on the assembled Stand and tight-
en the screws firmly.
Reinstalling the Printer iPF9400S
Basic Guide
Printer Relocation
Preparing to Transfer the Printer
80