Canon PowerShot ELPH 115 IS - Manual (Page 112)

112
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
Cover
Advanced Guide
7
Setting Menu
World Clock
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in Setting the Date and Time ( = 13).
1 Specify your destination.
z z Choose [Time Zone], and then press the
< m> button.
z z Press the < o><p> buttons to choose
[ World], and then press the < m>
button.
z z Press the < q><r> buttons to choose the
destination.
z z To set daylight saving time (1 hour
ahead), press the < o><p> buttons to
choose [ ].
z z Press the < m> button.
2 Switch to the destination time
zone.
z z Press the < o><p> buttons to choose
[ World], and then press the < n>
button.
X X [ ] is now shown on the shooting screen
( = 135).
• Adjusting the date or time while in [ ] mode ( = 13) will automatically
update your [ Home] time and date.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the < 1> button in Shooting mode ( = 29). To have the lens retracted
immediately after you press the < 1> button, set the retraction timing to [0 sec.].
z z Choose [Lens Retract], and then choose
[0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When the
camera is not in use, the screen quickly darkens to reduce battery consumption.
1 Configure the setting.
z z Choose [Eco Mode], and then choose [On].
X X [ ] is now shown on the shooting screen
( = 135).
X X The screen darkens when the camera is
not used for approximately two seconds;
approximately ten seconds after darkening,
the screen turns off. The camera turns off
after approximately three minutes of inactivity.
2 Shoot.
z z To activate the screen and prepare for
shooting when the screen is off but the lens
is still out, press the shutter button halfway.