Canon PowerShot ELPH 115 IS User Manual
Page 41
41
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
Cover
Advanced Guide
2
Smart Auto
Mode
Still Images
Deactivating the Flash
Prepare the camera for shooting without the flash as follows.
Configure the setting.
z
z
Press the <
r> button, press the <q><r>
buttons to choose [
!], and then press
the <
m> button.
X
X
Once the setting is complete, [
!] is
displayed.
z
z
To restore the original setting, repeat this
process but choose [ ].
•
If a flashing [ ] icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (
1
Configure the setting.
z
z
Press the <
n> button, choose
[Date Stamp ] on the [
4] tab, and
then choose the desired option (
X
X
Once the setting is complete, [ ] is
displayed.
2
Shoot.
X
X
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
z
z
To restore the original setting, choose
[Off] in step 1.
•
Date stamps cannot be edited or removed.