Canon PowerShot ELPH 115 IS - Manual (Page 99)

99
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
Cover
Advanced Guide
6
Wi-Fi Functions
Checking Your Wi-Fi Environment
To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access
point must be connected to a computer. Be sure to use a Wi-Fi base unit
that conforms to the Wi-Fi standard listed in Specifications ( = 144).
If you are already using Wi-Fi, confirm the following items and mark each
one on the Check sheet. For instructions on checking network settings,
refer to the access point user guide.
• If system administrator status is needed to adjust network settings,
contact the system administrator for details.
• These settings are very important for network security. Exercise
adequate caution when changing these settings.
Check sheet
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Network certificate/data encryption (encryption method/
encryption mode)
The method for encrypting data during transmission via
Wi-Fi.
○ None
○ WEP (open system
authentication)
○ WPA-PSK (TKIP)
○ WPA-PSK (AES)
○ WPA2-PSK (TKIP)
○ WPA2-PSK (AES)
Encryption key (network key)
The data encryption key used for transmission via Wi-Fi.
Key index (sent key)
The key specified when using WEP for Network certificate/
data encryption.
○ 1
• A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
• This guide refers to all Wi-Fi routers and base stations as “access points”.
• If you use MAC address filtering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing the [ 3] tab, [Wi-Fi Settings], and then [Check MAC
Address].
Computer Settings for Connecting via Wi-Fi
(Windows only)
On a computer running Windows, you must configure the following settings
before you can connect the camera to the computer wirelessly.
1 Confirm the computer is
connected to Wi-Fi.
z z For instructions on checking your network
connection, refer to the computer user
manual.
2 Configure the setting.
z z Click in the following order: [Start] menu
► [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [Wi-Fi connection
setup].
z z In the application that opens, follow the
on-screen instructions and configure the
setting.