Canon PowerShot ELPH 115 IS - Manual (Page 24)

24
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
4 Install the files.
z z Turn the camera on, and follow the
on-screen instructions to complete the
installation process.
X X The software will connect to the Internet
to update to the latest version and
download new functions. Installation may
take some time, depending on computer
performance and the Internet connection.
z z Click [Finish] or [Restart] on the screen
after installation.
z z Turn the camera off and disconnect the
cable.
• Using the software, you can update to the latest version, and download new
functions via the Internet (some software excluded).
• The first time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible.
• Because the content and functions of software vary according to the camera
model, if you have several cameras, you must use each camera to update to
its latest version of the software.
3 When a message is displayed
prompting you to connect
the camera, connect it to a
computer.
z z With the camera turned off, open the
cover ( ). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal ( ).
z z Insert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.