Setting and using the water heater, Danger – Electrolux EP19WI30LS User Manual
Page 14
12
Remote controller Display
Press the Power
On/Off Button.
How to Use
Setting and Using the Water Heater
Previous set
temperature
(Ex.: 110°F)
The temperature will be
displayed on the remote
control thermostat.
1
2
(Starting with the Power Off)
On
On
High Temperature
To prevent scalding:
Flashes for 10 sec
1
DANGER
Hot Water Heater temperatures over 125°F (52°C) can cause
severe burns instantly or death from scalding.
r
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask professional person.
r 8IFOTFUUJOHUIFVOJUUP'$ ' PSIJHIFS UIF
temperature display will flash for 10 seconds and emit a tone
as a high temperature warning.
r Take caution when using the unit again after setting to 125°F
(52°C) or higher. Always check the set temperature before use.
r %POPUBMMPXBOZPOFUPDIBOHFUIFXBUFSUFNQFSBUVSFXIJMF
hot water is running.