Electrolux EP19WI30LS - Manual (Page 17)

15
An alarm will sound for
ten seconds when the flow
reaches the set level.
The water will continue to run unless
it is manually turned off.
5 Turn off the hot
water when the
alarm sounds. 4 Turn on hot
water. 3
Adjust flow meter
alarm setting.
To set the flow meter alarm:
Press the flow meter alarm set button
(the setting will flash on the display)
and adjust with the setting buttons.
Increase
Decrease
Choose the flow meter alarm setting from the following
options: 10 - 60 gallon (40 - 240L) (In 5 gallon (20L)
intervals), 70 gallon (260L), 80 gallon (300L),
90 gallon (340L), 100 gallon (380L) , 990 gallon.
Note:
The alarm will not sound if it is
set for 990 gallon.
Note:
The alarm will not sound
if it is set for 990 gallon.
On
Flow meter setting will be flashing
(ex. 45 gallon)
Off
The alarm will sound when
the set level has been
reached. Stop the water.
* The level can only be adjusted
while the indicator is flashing.
* After ten seconds, the remote will
again display the temperature.
On
Flow meter setting will be flashing (ex. 180L)
Off
* Initial factory setting: 110°F or 40°C (104°F)
Water Temperature
The temperatures settings below are only examples. The
temperature setting necessary will depend on the usage,
the length of piping and the time of year. (
°C (°F) :
)
Warmer Hot Warm
37 38 39 40 41 42 43 44 45 46 47 48
(99) (100) (102) (104) (106) (108) (109) (111) (113) (115) (117) (118)
100 105 110 115 120
Warmer Hot Warm
The temperatures settings below are only examples. The
temperature setting necessary will depend on the usage,
the length of piping and the time of year. (
°F :
)