Acer Altos R310 - Manual (Page 109)

99
Hardware Requirements for R310
SATA RAID
Your system needs to have at least two SATA hard drives installed to
create a RAID array. A single hard drive is treated as JBOD and is
insufficient to create a disk array.
SATA RAID POST information
When the server boots up, POST information displays connected SATA
HDD information, array information, and SATA JBOD information.
SATA HDD information includes:
• attached port ID
• HDD model
• firmware version
• drive capacity
• drive status
Array information includes:
• array RAID level
• port
• drive models
• drive capacities
BB!S421!.!FO/cppl!!Qbhf!::!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN