Acer Altos R310 - Manual (Page 114)

Appendix C: SATA RAID configuration utility 104
To Rebuild RAID 1
If a RAID 1 is created with Build and Clear and then stopped, the
Rebuild function of the utility can be used to resume.
1 Select the RAID 1 Array from the List of Arrays.
2 Press <Ctrl> + <R> to begin the rebuid operation.
To Mark/Unmark an Array as Bootable
1 Select an array from the List of Arrays.
2 Press <Ctrl> + <B> to toggle wether an array is bootable.
Create and Manage RAID 0
Create RAID 0 from new drives
1 Initialize the drives.
2 In the Main Menu, select Create Array, and press <Enter>.
BB!S421!.!FO/cppl!!Qbhf!215!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN