Acer Altos R310 - Manual (Page 113)

103
To Delete an Array
1 Select an Array from the List of Arrays as shown below.
2 Press the <Delete> key.
To Verify a RAID 1
If a RAID 1 is created using Quick Init, this utility can be used to verify
the array.
1 Select the RAID 1 Array from the List of Arrays.
2 Press <Ctrl> + <S> to begin RAID verification.
3 Press <Y> or <N> to accept or decline automatic repairs by the
utility.
BB!S421!.!FO/cppl!!Qbhf!214!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN