Acer Altos R310 User Manual
Page 117
107
Create RAID 0 from source drive
1
Install a new HDD and initalize it.
Warning! Do NOT initailize the source drive! Doing so will
destroy all data!
2
From the Main Menu, select Create Array, and press <Enter>.
3
Press the <Ins> key to add to the new drive(s) to the Selected
Drives field.
4
Press the <Enter> key to confirm your selection.
5
In the Array Type field, move the cursor to RAID 0(Stripe) and
press the <Enter> key.
6
Use the <Tab> key to scroll to the Array Label field and enter text
to identify the array. Press <Enter> to confirm the array’s label.
7
Scroll to Stripe Size, by using the <Tab> key, and select 16 KB, 32
KB, or 64 KB using the arrow keys. Press <Enter> to confirm the
array stripe size.
8
Using the <Tab> key, scoll to the Create RAID via field and select.
Migrate. Press <Enter> to continue.
9
With the <Tab> key, scroll to Done, and press <Enter>.
10 Select the Source Drive, and press <Enter> followed by <Y>.
Create RAID 1 from new drives
1
Install new HDD(s) and initalize it/them.
2
From the Main Menu, select Create Array, and press <Enter>.
3
Press the <Ins> key to add to the new drive(s) to the Selected
Drives field.
4
Press the <Enter> key to confirm your selection.
5
In the Array Type field, move the cursor to RAID 1(Mirror) and
press the <Enter> key.
6
Use the <Tab> key to scroll to the Array Label field and enter text
to identify the array. Press <Enter> to confirm the array’s label.
7
Scroll to Stripe Size, by using the <Tab> key, and select 16 KB, 32
KB, or 64 KB using the arrow keys. Press <Enter> to confirm the
array stripe size.
8
Using the <Tab> key, scoll to the Create RAID via field and select.
Clear or Quick Init. Press <Enter> to continue.
BB!S421!.!FO/cppl!!Qbhf!218!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN