Acer Altos R310 User Manual
Page 42
3 Getting Started
32
9Ch
Set up Power Management. Initiate power -
management state machine.
9Dh
Initialize Security Engine.
9Eh
Enable hardware interrupts.
9Fh
Check the total number of Fast Disks (ATA
and SCSI) and update the bdaFdiskCount.
A0h
Verify that the system clock is interrupting.
A2h
Setup Numlock indicator. Display a message
if key switch is locked.
A4h
Initialize the typematic rate.
A8h
Overwrite the "Press F2 for Setup" prompt
with spaces, erasing it from the screen.
AAh
Scan the key buffer to see if the F2 key was
struck after keyboard interrupts were
enabled. If an F2 keystroke is found, set a
flag.
ACh
Enter SETUP
If (F2 was pressed)
go to SETUP
Else if (errors were found)
display "Press F1 or F2" prompt
if (F2 is pressed)
go to setup
else if (F1 is pressed)
boot
Else boot
AEh
Clear ConfigFailedBit and InPostBit in
CMOS.
Checkpoint
Code
Beep Code
Description
BB!S421!.!FO/cppl!!Qbhf!43!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN