AT&T 9050 - Manual (Page 14)

12
TELEPHONE MEMORY
This cordless phone can store 10 telephone numbers that you can dial just by
pressing
m and a number button.
Storing Memory Numbers
1 Make sure the handset is off.
2 Press p (the PHONE light blinks).
3 Press a number key (0 to 9) to select a memory location.
4 Enter the number you want to store (up to 16 digits)
— OR —
Press
R to store the last number dialed.
5 Press m. You will hear a confirmation tone.
Replacing Stored Memory Numbers
You can replace a stored number by storing a new number in its place.
Storing a Pause in a Memory Number
While storing a number in memory, press and hold down the number button
that comes before the pause until you hear the second beep. This inserts a
two-second pause after that digit. If you hold the button down longer, you
will hear more beeps as additional pauses are stored.
For example, to store 9, PAUSE, 555–0123 in memory location 3: Press p,
3, then hold down 9 until you hear the second beep. Then press 5 5 5 0
1 2 3, e.
Dialing Memory Numbers
1 Press P.
2 Press m.
3 Press the number button (0–9) for the memory location of the number
you’re calling.
Memory Guard
The phone numbers you store in memory are protected from loss when you
change the handset battery, or in the event of a power failure.
9050_book.1AT&T 8/12/98, 4:14 PM 12