AT&T 9050 - Manual (Page 22)

20
ANSWERING SYSTEM OPERATION
FROM A REMOTE TOUCH TONE PHONE
This cordless telephone answering system allows you to retrieve messages and
access other features using a remote touch tone phone, even when you are
away from your home or office.
Connect with the Answering System
1 Dial your telephone number.
2 When the outgoing announcement begins to play, press and release
#, then immediately enter your Remote Access Code (see “Remote
Access Code” in ANSWERING SYSTEM SETUP).
3 The system beeps once, announces the number of new messages,
and plays back any new messages.
Voice Help Menu
About 10 seconds after messages have been played, the system gives you a list
of remote commands:
Press # 2 to play all messages
Press # 5 to stop
Press # 4 to repeat the message
Press # 6 to skip the message
Press # 9 to erase the message
Press # 1 for other functions.
If you press # 1 for other functions, the system gives you a new list of selections:
Press # 7 to review the outgoing message
Press * 7 to record an outgoing message
Press * 8 to record a memo
Press # 4 twice to repeat the previous message
Press # 0 to turn the system on or off
Press # 1 for other functions (returns you to first list of selections)
Press * 0 to exit remote operation mode.
Remote Access Commands
Playing Messages
1 Connect with the answering system.
2 Listen to new messages.
3 To play all messages, press # 2.
To repeat a message, press # 4.
To return to the previous message, press # 4 # 4.
To skip a message, press # 6.
To stop message playback, press # 5.
To save messages, hang up.
9050_book.1AT&T 8/12/98, 4:15 PM 20