AT&T 9050 - Manual (Page 17)

15
ANSWERING SYSTEM SETUP
To return to the prerecorded announcement
1 Press and release U until you hear “Set outgoing message.”
2 Press and release Y. The system plays the current announcement.
3 Press and release D while the announcement is playing. The
system prompts “Outgoing message has been erased.”
4 Press and release U to set up another feature
— OR —
Press and release
Y to exit.
Ring Select and Toll Saver
Use Ring Select to select how many times the phone will ring before the system
answers a call. Set for 2, 4 or 6 rings, or set to Toll Saver. When you set the
system to Toll Saver, the system answers after 4 rings when you have no new
messages, and after 2 rings when you have new messages.
1 Press and release U until you hear “Set number of rings.”
2 Press and release S until you hear your desired setting (2, 4, 6 or
Toll Saver).
3 Press and release C to confirm your selection. The system
announces your ring selection.
4 Press and release U to set up another feature
— OR —
Press and release
Y to exit.
Audible Message Alert
If you want the base to beep once every 10 seconds to notify you that new
messages have been received, set the Message Alert to ON. (The Message
Window displays ON for on, and OF for off.)
1 Press and release U until you hear “Set audible message alert.”
2 Press and release S. The system announces the current setting.
3 Press and release S until the system announces your selection
(on or off).
4 Press and release C to confirm your selection. The system
announces your selection.
5 Press and release U to set up another feature
— OR —
Press and release
Y to exit.
9050_book.1AT&T 8/12/98, 4:14 PM 15