Actiontec electronic GT701 - Manual (Page 10)

7
Setting Up
the Modem
The instructions that follow in this chapter parallel the steps contained in the
Actiontec Installation Buddy
® , which provides a visual, step-by-step guide to setting
up the Modem. It is recommended the user run the Installation Buddy first, before
attempting any other procedures.
If your Internet Service Provider ( ISP ) provided a welcome letter or worksheet
containing information needed to complete the installation, have it available. If this
document was not received, contact the
ISP to get the needed information.
☞
Note: The following procedures are for US installations. If you
live in the UK or another country, the procedures will be slightly
different.
Connecting a Computer to the Modem
Connecting a computer to the Modem involves three steps: initial setup, plugging
in the power cord, and connecting the Modem to the computer and phone jack.
Connecting Via Ethernet
1. Insert the Installation CD in the CD-ROM drive of the computer. The
Installation Buddy starts automatically. Wait until the following screen
appears, read the on-screen instructions, select the country in which you live
by clicking in the appropriate check box, then click Next.
2