Performing a basic setup, Basic setup – Actiontec electronic GT701 User Manual
Page 32
29
Performing a
Basic Setup
This chapter is a guide through a basic setup of the Modem for those users who
did NOT use the Actiontec Installation Buddy® to setup the Modem. It includes
instructions on how to connect the Modem to the
ISP
and changing the admin
user name and password.
To complete a basic setup, the user will need information provided by the
ISP
. This
information is sometimes contained in a welcome letter or
ISP
worksheet. If this
document is not available, contact the
ISP
immediately and request one.
Basic Setup
☞
Note: If you already set up the Modem using the Installation
Buddy (as described in Chapter
2
, “Setting Up the Modem,” on
page
7
), the settings described in this section have already been
configured. Continue to chapter
4
, “Using Advanced Setup” on
page
33
,
to configure the advanced settings of the Modem.
1. Open a Web browser. In the address bar, enter
http://192.168.0.1
then press Enter on the keyboard.
2. The “Main Menu” screen appears. Select Setup/Configuration.
3